DESCRIPTION
The BIOFORCEN Biomechanics Tri-axial Accelerometer model JA-T003
was specifically designed for the precise measurement of
acceleration and gravity induced reaction forces. The transducer
measures the three orthogonal acceleration components along the X,
Y, and Z axes. The high sensitivity, low crosstalk, excellent
repeatability and long term stability of this transducer makes it
ideal for research and clinical studies.
Technical parameters:
Uniaxial / biaxial / triaxial acceleration signals real-time
detection, storage
Wired / Wireless Data Transmission
Trigger Mode: synchronous triggering, synchronization signal output
Storage capacity: 64Mb/128Mb
Range1g - 100g, Resolution: 12 bit
Sampling Frequency :10-1000Hz or higher (program control)
CMRR:> 110dB, Interface Standard: USB
Synchronization time error: <1ms, continuous working time: "2
hours
Chinese version of the software, providing the shaft acceleration
of the original data / time control
Patented synchronization methods to obtain multi-channel precision
time synchronization Acceleration Test
Extremely lightweight body and easy movement to carry | |
AMPLIFICATION
The JA-T003 model Biomechanics Tri-axial Accelerometer uses
capacitive sensor. The device consists of two surface micromachined
capacitive sensing cells and a signal conditioning ASIC contained
in a single integrated circuit package. The sensing elements are
sealed hermetically at the wafer level using a bulk micromachined
cap wafer. It provides excitation and amplification for multiple
channels in one convenient package. These amplifiers process the
transducer signals and provide outputs suitable for an A/D
converter so that the data can be stored and processed by a
computer.
CALIBRATION
Each platform is inspected and tested in BIOFORCEN’s calibration
facility. The calibration procedure provides a detailed sensitivity
matrix and a complete test of all system components, including the
amplifier and the connecting cable if ordered together.
SOFTWARE
Automated data collection and reduction requires a computer and
software. BIOFORCEN-Analysis, BIOFORCEN’s software package, is
specifically designed for biomechanics applications. It provides
quick and easy hardware setup and automated data acquisition and
analysis. BIOFORCEN-Analysis allows the user to quickly begin
testing rather than take on the tedious and lengthy process of
writing data acquisition and reduction routines. The
BIOFORCEN-Analysis software package is available separately or
combined in one of BIOFORCEN’s Bioforcen Systems.
Dynamic data acquisition and analysis software package, designed
for gait analysis and sports biomechanics applications;
Quick and easy hardware installation and automatic data acquisition
and analysis system;
Users can quickly test can be run separately or combined in the
overall gait analysis system.
BIOFORCEN’S BIOFORCEN SYSTEMS
Systems are complete gait and balance analysis tri-axial
Accelerometer systems. Each system consists of Wireless
acceleration Signal acquisition device, Wireless interface device,
Acceleration sensors, Cable, Data acquisition and analysis
software, Charger, Rechargeable Battery, Test bandage, USB cable,
Tripod, all sold at a special system price.
CUSTOM
BIOFORCEN also offers special multi-axis Accelerometer to meet
your specific needs. The transducer with capacities as high as ±6g
have been made. Contact BIOFORCEN for any custom requirements.
